Safety Flashes for 2005
| |
Safety Flash |
Date |
 |
IMCA Safety Flash 01/05- Correct specification of shackles
- Helideck foam sample
- Lifting techniques
- Driving policy
- Dropped objects from scaffolding
- Dropped object during delivery of offshore container
|
Jan 2005 |
|
IMCA Safety Flash 02/05- Fatality - fall from height
- Vertical lay system dropped during quayside mobilisation
- Fire at sea
- Securing of loads
|
Feb 2005 |
|
IMCA Safety Flash 03/05- Finger injury during loading operations
- Injury while grinding without PPE
- Gas leak during removal of temperature sensor from thermo well
- Diver injury from implosion of a fishing buoy
- Floating ignition source drifts near to production platform
- Diver hand burn injury during underwater cutting operation
- Incident involving Cameron high pressure accumulator
- Fatality - swinging load incident
- Fire caused at the stern of a dive support vessel by flaring gas from a rig
- Uncontrolled ascent of lay-down head
- Fatality - grinder incident
- Near miss - diver's umbilical severed by propeller
- MRSA and appropriate use of antibiotics
- Transponder pressure relief system failure
|
Mar 2005 |
|
IMCA Safety Flash 04/05- Incident involving Cameron high pressure accumulator (follow up to safety flash 03/05 item 7
|
Mar 2005 |
|
IMCA Safety Flash 05/05- Starting air system incident
- Pollution caused by burst hydraulic hose
- Caution notice: Kirby Morgan regulators
|
Apr 2005 |
|
IMCA Safety Flash 06/05- Hand grinder injuries
- Leaking oxygen valve
- Near-miss: Flooding of a diver's helmet
|
May 2005 |
|
IMCA Safety Flash 07/05- ROV free-fall incident
- Product safety recall: Kongsberg RPT transponders
|
May 2005 |
|
IMCA Safety Flash 08/05- Jellyfish incident
- Caution notice: Electric Gasmizer gas booster
- Diving bell clamp mating screws
|
Jul 2005 |
|
IMCA Safety Flash 09/05- Malfunction of Kirby Morgan B17 side block non-return valve
- Serious injury during crane operations
|
Jul 2005 |
|
IMCA Safety Flash 10/05- Crane wire failure
- Engine room fire
- Explosion in ballast tank causing loss of life
- Lost anchor chain
- Near-miss during heavy lift operations
|
Oct 2005 |
|
IMCA Safety Flash 11/05- Engine room fires - Appropriate use of insulating material on hot surfaces
- Near-miss during diving operations
- Engine room flooding
- Object falling from height
- Near-miss during lifting operations
- Near-miss - Dropped object narrowly misses worker
|
Nov 2005 |
|
IMCA Safety Flash 12/05- Failure of high pressure fitting
- Lifting fatality
|
Dec 2005 |
|
