Skip to content

Two cases of hand injuries – UK HSE

Incident 1: Worker Injures Hand on Lathe

What happened

THE UK Health & Safety Executive (HSE) reports that an engineering firm was sentenced after a worker suffered injuries to his hand. A worker was polishing a metal shaft on a lathe using emery cloth, while wearing gloves. The glove appeared to snag and dragged his hand towards the rotating shaft. As a result of the incident he had stitches in his hand and dislocated his scaphoid bone – part of his wrist.

What went wrong/causes

The injured person had only been working for four days at the site.

The HSE investigation found that:

  • No suitable and sufficient assessments had been carried out to determine control measures for this task of polishing;
  • There were no clear guidelines for employees and others, such as agency workers, on safe ways to polish.

The HSE inspector commented: “Those in control of work have a responsibility to devise safe methods of working and to provide the necessary information, instruction and training to their workers in the safe system of working. This incident could so easily have been avoided by simply carrying out correct control measures and safe working practices.

Incident 2: Workers exposed to Hand-Arm Vibration Syndrome (HAVS)

What happened

THE UK Health & Safety Executive (HSE) reports that an engineering firm has been fined for failing to control the risk of hand-arm vibration syndrome (HAVS) to employees using hand-held power tools. A welder who had been working at the company for a number of years had been given a job that involved a significant amount of grinding and polishing. After some hours on the task, the worker began to experience numbness and tingling. He asked to swap with another worker but was told to carry on.

Whilst his symptoms continued he was told by his supervisor to carry on using vibrating tools. A few weeks later, a 20-year-old apprentice welder also began to suffer from vibration-related symptoms from using similar tools.

What went wrong/causes

The company failed to adequately control the risks to its employees from exposure to vibration. The company also failed to ensure its employees were given sufficient information, instruction and training on the effects of working with vibrating hand tools.

The HSE inspector said: “This is a case of the company failing to protect workers using vibrating tools. Exposure to hand-arm vibration is a well-known risk which the company failed to adequately control. The company also failed to ensure workers were looked after when symptoms did arise leading to further exposure. This was wholly inadequate, and led to two employees suffering significant health effects.

Members are encouraged to bring to the attention of their crews the IMCA safety promotional materials on hand safety and other topics, available free to members. See https://www.imca-int.com/core/hsse/publications/safety-promotion/

Hand and finger injuries comprise a significant proportion of all the incidents reported by IMCA members and, in many cases, the root causes of the injuries – as in these cases – are failure to assess risk or properly manage change, or failure to provide a safe system of work.

Members may wish to review the following incident:

In summary

IMCA members continue to report signification numbers of hand and finger injuries. They can be broadly divided into two categories. Firstly, incidents/injuries in which the use of hand tools was a causal factor, and secondly, finger nips and crush injuries caused when moving large or heavy objects from one place to another (which is a core task for anyone operating vessels and hence for most IMCA members).

Members may wish to look at some of the following incidents (search words: hand, finger, crush):

This list focuses on injuries caused during use of hand tools:

This list focuses on finger nips and crushes generally, but not always, from loading or lifting operations:

Safety Event

Published: 2 August 2017
Download: IMCA SF 19/17

Relevant life-saving rules:
IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.