Failure of ROV lift umbilical winch brake – Update
In the Safety Flash 09/01 we gave an update on the design problem found in a Macartney Cormax unit manufactured by Norlau (see Safety Flash 08/01 – Failure of ROV lift umbilical winch brake). A member advises that they have determined with the manufacturer of the winches that the hydraulic motors were inadvertently supplied without two check valves being fitted (although the circuit showed them being in place). The manufacturer will be refitting all of the member’s winches with replacement motors. The member understands (but cannot sure) that the manufacturer will be advising all other users of these winches about the problem. The member is continuing to operate the winches in slow speed until each motor has been replaced.
Safety Event
Published: 1 October 2001
Download: 
IMCA SF 11/01
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.