Skip to content

LTI – fall from height

A service engineer fell off a radar antenna and was seriously injured.  The incident happened after two service engineers from a subcontracted company were on a vessel for the day to install a new electronics board in a radar antenna. 

The job was completed safely, and all documentation related to permit to work (PTW)and job safety analysis (JSA) done, and a service report has been issued.  Then one service engineer went back to the monkey island to collect some missing tools, without wearing any personal protective equipment (PPE) (e.g. no fall protection) and without ensuring that the lock out/tag out and PTW were still in place.

When he reached the monkey island, he couldn’t find the missing tool, and so he went to check on the mast itself.  At that moment, the Captain and the second service engineer operated the radar for a final test.  The radar antenna started to rotate and hit the service engineer.  He lost balance and fell down from the mast to deck and landed on the roof of a fiberglass lifeboat.  He suffered multiple fractures and was fortunate not to have been killed.  He was medevaced to hospital for surgery.

What were the causes?

Our members’ investigation identified the following main causes:

  • Poor communication and coordination;
  • Poor management of subcontractors on the part of the vessel crew;
  • Weak safety culture in subcontractor;
  • Insufficient job preparation and completion of checklists.

Lessons learned and actions taken

  • Better communication required: the vessel Master and second service engineer were not informed that the service engineer went back up onto the monkey island;
  • Job preparation: more attention should be given to detail in preparation and to identification and mitigation of risks;
  • Subcontractor management: better management and control of subcontractor required. Subcontractors should be more thoroughly monitored, especially when working in a dangerous area;

Subcontractor selection: better selection should be made to focus on HSE aspects and to encourage subcontractors to improve their safety culture.

IMCA Safety promotional materials can be found on the IMCA website.

Members may wish to refer to:

Safety Event

Published: 23 August 2019
Download: IMCA SF 20/19

Relevant life-saving rules:
IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.