Skip to content

Electrical integrity of an ROV

During a vessel ROV mobilisation in port, a subcontractor’s 3-phase hydraulic power unit was connected to the vessel’s power supply. The unit was energised without either inspecting the third party equipment wiring or carrying out earth and continuity checks. This resulted in the contractor’s supervisor receiving a potentially lethal electrical 220v shock.

This incident highlights the importance of checking all third party equipment mobilised to vessels for integrity and compatibility prior to hook up and energising. It also highlights the need to obtain proof of wiring integrity.

The contractor has elected to:

  1. ensure that generic risk assessments address hook up and compatibility of all third party equipment mobilised to its work sites;
  2. review procedures for controlling third party activities and equipment; and
  3. ensure that wiring integrity assurance are requested from sub-contractors both at time of audits and on receipt of equipment at the work site.

Safety Event

Published: 1 January 1998
Download: IMCA SF 01/98

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.