Skip to content

Fall from height

A member has reported an incident in which a person was injured in a fall from a different level. A saturation diver used the transfer under pressure (TUP) access hatch to come out of the saturation chamber while unloading equipment. To re-enter the chamber the diver held on to the top dogging bar of the chamber. The dogging bar rotated towards him causing him to lose his grip and fall approximately five feet on to the bell skid leading to muscle contusion and hairline fractures of his right forearm and right thigh.

Further investigation revealed the following:

  • In normal circumstances the presence of the diving bell at this TUP access hatch made access and egress safe. When the diving bell was removed, there was less edge protection around the platform;
  • The injured person did not recognise the lack of protection and increased risk of falling;
  • The injured person used an incorrect handle (dogging bar) to pull himself into the chamber.

The following recommendations were made:

  • Reinforce the importance of management of change procedures;
  • Ensure the correct fixed handholds are used when accessing or exiting a saturation chamber;
  • Ensure all relevant personnel are aware of the location and use of the correct handholds;
  • Construct a removable platform with additional edge protection to facilitate access to and from the chamber when the bell is not present (see second picture).
Saturation chamber from which diver fell
Saturation chamber from which diver fell
Movable platform to allow safe access to saturation chamber
Movable platform to allow safe access to saturation chamber

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.