Skip to content

Diving helmet locking collars

One of our members has brought to our attention that certain Kirby Morgan diving helmets, type KMB 601, neck dam locking collars have been subjected to pitting during oxy-arc cutting due to electrolysis. These particular locking collars were all made of cadmium-plated aluminium alloy.

On investigating this matter with the supplier and manufacturer, the contractor has been advised that only a small quantity of cadmium-plated aluminium alloy locking collars were manufactured. The supplier has not been able to quantify the number of such collars sold, nor identify to whom they were sold.

Because of the electrolysis action, the manufacturer has now reverted to traditional brass or stainless steel locking collars.

It is not thought that the aluminium alloy locking collars will represent a safety hazard if regularly inspected before use. However, as deterioration has been observed, the contractor involved has decided that it would be prudent to replace all their aluminium alloy locking collars.

Safety Event

Published: 1 January 2000
Download: IMCA SF 01/00

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.