Failure of rescue boat release mechanism
The Marine Safety Forum has published Safety Flash 11-36 regarding the failure of a rescue boat release mechanism. During a routine launch of the rescue boat whilst at sea, the painter released early causing the towing forces normally absorbed by the painter to shift onto the fall wire once the boat was waterborne. This resulted in the rescue boat capsizing. It is possible that the early release of the painter was due to a failure in the painter release mechanism.
Further investigation is ongoing.
Further information is available in the linked IMCA Safety Flash only.
Safety Event
Published: 25 November 2011
Download: 
IMCA SF 13/11
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.