Skip to content

Fatality during loading operations

A member has reported an incident in which a crew member was struck and fatally injured by a mini-container whilst working on back-loaded cargo from a drilling rig. The incident occurred when heavy seas struck the vessel causing sudden movement of landed cargo, upon which the crew were still working to make it fully secure. The movement of this cargo resulted in a crew member being trapped between a mini container and a skip bin. The vessel crew responded to the injured person, releasing him from between the mini container and the skip, and administering first aid and CPR. He was further attended to by a medic who was transferred from the drilling rig. The injured person was transferred to the rig but could not be revived.

The vessel had been alongside the rig for a number of hours during the night, during which time six loads had been transferred to the rig and nine loads (mostly empty containers) back-loaded from the rig. After four hours the weather had started to deteriorate. The chief officer of the vessel advised the drilling rig that the vessel would be ceasing cargo operations and that the drilling rig crew should stop any further loading. The vessel moved approximately 30m away from the rig (still sitting in the lee of the rig for additional shelter). Seas at the time were running between 2m and 3m and the wind was 24 knots, gusting to 36 knots.

During this time the deck crew continued work on securing the cargo. Two Able Seamen (ABs) working on the deck decided that the sea fastening arrangement was not adequate to restrain the two mini containers located at the forward end of the deck. Additional rigging was required to rectify this, and one of the ABs left the deck to go to the nearby rigging store. The tension on the tugger winch was released to facilitate installation of the new rigging. A large wave crashed over the back deck of the vessel and travelled along the length of the deck, with the force of the wave causing movement of some of the landed cargo. The movement of this cargo resulted in the ABs becoming trapped between a mini container and a skip bin, with fatal consequences.

Plan view of vessel
Plan view of vessel
Photographs showing scene of incident
Photographs showing scene of incident
Photographs showing scene of incident
Photographs showing scene of incident

Our member’s investigation identified the following immediate causes:

  • Working in and around unsecured cargo had become part of a familiar routine;
  • A vessel with an open stern being used for cargo operations;
  • Wave struck cargo;
  • Cargo shifted 3-4 m on deck aft to forward;
  • The crewman involved did not get out of the ‘line of fire’ or hear the bridge warning over UHF radio.

Our member’s investigation identified the following root causes:

  • Vessel operations in the 500m rig zone are not recognised as Simultaneous Operations (SIMOPS) for the rig and vessel. There was no process in place to ensure effective communications, load sequencing, deck layout planning, cargo securing plans and optimizing time of vessel alongside rig in Dynamic Positioning (DP) mode;
  • The potential for injuries to crew undertaking cargo securing tasks offshore on Anchor Handling Tug Supply (AHTS) vessels (due to open stern) had not been identified as high risk;
  • No risk assessment had been carried out for suitability of AHTS vessels performing cargo operations;
  • The vessel procedure for cargo loading and unloading did not describe a cargo lashing plan, and although there was a risk assessment for cargo loading, there was no specific risk assessment for the work activities associated with the further securing of landed cargo.

Our member took the following actions, with a view to minimising the risks associated with cargo operations to As Low As Reasonably Practicable (ALARP):

  • Further detailed risk assessment for AHTS conducting cargo operations. Risk assessment should include consideration of engineering controls to minimize excessive water on the vessel back deck (stern door or use of other vessel type);
  • A review and update of company adverse weather working guidelines;
  • A review of company cargo loading procedure to include cargo lashing arrangements, and further risk assessment for securing cargo;
  • A review and update of company cargo securing procedure and risk assessment to include the requirement for a lashing plan and load sequence planning with rig before entering the 500m zone.

The Marine Safety Forum (MSF) has published a number of incidents in recent years drawing the attention of marine contractors to incidents during cargo operations. These have all been passed to members as IMCA safety flashes, but the details will need to be sought from the MSF, whose website is not available at the time of publication of this safety flash. Brief details are set out here:

Safety Event

Published: 7 December 2015
Download: IMCA SF 21/15

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.