DESIGN for saturation (bell) diving systems

Version History:

  • November 2023, Rev. 3.2 – References to withdrawn AODC documents have been updated to current relevant IMCA references; references in Part 2 to appendices in D051 have been corrected
  • August 2022, Rev. 3.1 – Updated to align with the guidance contained in IMCA LR 001/‌HSSE 022/ M 194. Text of item dealing with diver emergency gas supply (bail-out) endurance slightly amended for clarity.
  • December 2021, Rev. 3 – Updated to clarify any anomalies and bring the guidance into alignment with current industry good practice.
  • July 2014, Rev. 2 – Updated to align the document with IMCA D 018, D 023 and D 053.  Section 15 split into four sub-sections and Section 16 on life support packages added.
  • March 2013, Rev. 1 – Revised and updated to incorporate equipment improvements and changed operating practices since initial publication.
  • 2001 – Initial publication.

 

Contents

Part 1 – Guidance

  • Introduction
  • List of Acronyms
  • The Competent Person
  • Responsibilities
  • Planned Maintenance Systems (PMS)
  • Key Features of this Document
  • Completing the Document
  • References

Part 2 – Detail Sheets

  • Section 1 – General Safety
  • Section 2 – Dive Control
  • Section 3 – Surface Compression Chamber
  • Section 4 – Bell Launch and Recovery System
  • Section 5 – Diving Bell
  • Section 6 – Life Support Control
  • Section 7 – Main Bell Umbilical
  • Section 8 – Diver Heating System
  • Section 9 – Divers’ Umbilicals
  • Section 10 – Divers’ Personal Equipment
  • Section 11 – Compressors, Pumps, etc.
  • Section 12 – High Pressure Gas Storage
  • Section 13 – Diver Gas Reclaim
  • Section 14 – Chamber Gas Reclaim and Purification
  • Section 15.1 – General – HES System
  • Section 15.2 – HRU Interface with Dive System
  • Section 15.3 – Hyperbaric Rescue Unit (HRU)
  • Section 15.4 – HRU Launch and Recovery System

Members should log in to access downloads
and discounted pricing on physical items.

Related Information Notes