Load dropped owing to incorrect manufacture of “flemish eye” crane pennant
- Safety Flash
- Published on 27 September 2010
- Generated on 14 May 2026
- IMCA SF 06/10
- 1 minute read
The UK Health & Safety Executive (UK HSE) has published the attached safety flash regarding the dropping of a 9.5 tonne load on an offshore installation as a result of the incorrect manufacture of a 15 tonne Flemish eye crane pennant.
The information can also be found at hse.gov.uk/safetybulletins/flemish-eye-crane-pennant.htm
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.