Equipment damaged by waterspout

  • Safety Flash
  • Published on 16 April 2014
  • Generated on 2 May 2026
  • IMCA SF 06/14
  • 1 minute read

The United States Department of the Interior Bureau of Safety and Environmental Enforcement (BSEE) has published the following safety alert, regarding an incident in which hydraulic work-over equipment was toppled over and damaged by a waterspout which touched down nearby. A significant amount of equipment was lost as a result, but there were no injuries or loss of life.

The safety flash can be downloaded from here.

Latest Safety Flashes:

Failure of moonpool railing system caused man overboard situation in moonpool

A crew member was working in the moonpool area when they lost balance and fell in but managed to grab hold of the guidewire, preventing an uncontrolled fall into the sea.

Read more
Diver entanglement – uncontrolled equipment in the water column

A diver hung a rubber mat with welding rods connected with a rope and carabiner to the rope suspending the welding cables resulting in a compromised work area.

Read more
Diver entanglement – umbilical caught around an anode

A diver’s umbilical got caught around an anode attached to a conductor shaft at 18 msw.

Read more
Unsecured sheave pin fell from crane

A sheave pin weighing 1.3 kg was found on deck.

Read more
Heaving line snap-back causes injury
Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.