Lifting operations – securing equipment

  • Safety Flash
  • Published on 27 January 2011
  • Generated on 29 April 2026
  • IMCA SF 01/11
  • 1 minute read

The Marine Safety Forum has published Safety Flash 11-02 regarding an incident in which, owing to a failure of communication, attempts were made to lift equipment which was still secured to the deck. 

Although no harm was done, the incident could have resulted in serious injury to personnel and damage to the equipment being lifted.

[Older safety flashes are now available from the Marine Safety Forum on request.]

Members may wish to review:

Latest Safety Flashes:

Failure of moonpool railing system caused man overboard situation in moonpool

A crew member was working in the moonpool area when they lost balance and fell in but managed to grab hold of the guidewire, preventing an uncontrolled fall into the sea.

Read more
Diver entanglement – uncontrolled equipment in the water column

A diver hung a rubber mat with welding rods connected with a rope and carabiner to the rope suspending the welding cables resulting in a compromised work area.

Read more
Diver entanglement – umbilical caught around an anode

A diver’s umbilical got caught around an anode attached to a conductor shaft at 18 msw.

Read more
Unsecured sheave pin fell from crane

A sheave pin weighing 1.3 kg was found on deck.

Read more
Heaving line snap-back causes injury
Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.