Basket snagged on ship’s structure

  • Safety Flash
  • Published on 13 February 2020
  • Generated on 12 December 2024
  • IMCA SF 05/20
  • 1 minute read

The Marine Safety Forum (MSF) has published Safety Alert 19-14 relating to an incident whereby a basket snagged on the ship's structure causing damage to the vessel and basket

What happened?

A cargo basket designed for tubulars was being backloaded at the stern of the vessel.

The lift was initially lowered to the deck to steady it. As it was being lifted to be repositioned, the basket swung to starboard into the restricted hose bay area and at the same time the vessel dipped in the waves, causing the basket to snag on the protection bar around the hose bay. 

The basket suddenly came free and landed on an adjacent container causing minor damage. 

The basket also swung into the ship’s handrails causing minor damage. Vessel crew were in a safe place and there were no injuries.

A cargo basket designed for tubulars was being backloaded at the stern of the vessel. As it was being lifted to be repositioned, the basket swung to starboard into the restricted hose bay area and at the same time the vessel dipped in the waves, causing the basket to snag on the protection bar around the hose bay.

What actions were taken?

Members may wish to refer to:

  • IMCA HSS019 Guidelines for lifting operations

Latest Safety Flashes:

LTI: Finger injury during emergency recovery of ROV

A worker suffered a serious finger injury when their finger was caught between a crane wire and the recovery hook on an ROV.

Read more
BSEE: recurring hand injuries from alternative cutting devices

The United States Bureau of Safety and Environmental Enforcement (BSEE) has published Safety Alert 487.

Read more
NTSB: Crane wire failure

The National Transportation Safety Board of the United States (NTSB) published "Safer Seas Digest 2023".

Read more
Hot work performed outside of Permit to Work (PTW) boundary limit

A near miss occurred when a third-party contractor working removed a trip hazard from the vessel main deck, using a cutting torch and grinding disc.

Read more
Vital safety information (height of vehicle) found incorrect

“Height of vehicle” information displayed on a truck, was found to be incorrect.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.