MSF: Hand Injury Sustained During Routine Checks

  • Safety Flash
  • Published on 22 September 2021
  • Generated on 12 December 2024
  • IMCA SF 26/21
  • 2 minute read

The Marine Safety Forum (MSF) has published Safety Alert 21-13 relating to a hand injury sustained during routine activities

What happened?

During routine weekly checks, an operator was performing tests for the emergency generator.

The MSF reports that the operator approached the generator to investigate an abnormal noise coming from the cooling fan, his fingers were struck by the fan blades, and he sustained an injury to three of the fingers on his right hand.

Why did it happen?

The MSF’s correspondent notes the following:

  • Unsafe, complacent behaviour.

  • Lack of situational awareness – the operator placed his hands in an area with a partly exposed rotating part.

  • The injured person was working alone.

  • The fan was partly unprotected.

Actions and lessons learned

  • Modifications were made to the fan guard of the emergency generator to avoid any possibility of touching the fan – and warning signs were posted.

  • Further training for crew in “Situational Awareness”.

  • A fresh look at hand safety in general:

    • Always be aware of where your hands are at all times.

    • Always wear the appropriate PPE (including the right gloves for the job).

    • Always identify all potential hand hazards (i.e. line of fire, pinch points) and take the appropriate mitigating steps during the planning stage of a job.

    • Always use Risk Assessment and Toolbox Talk as appropriate in all tasks, whether formal or informal.

    • Risk Assessment should be specific and should identify the hazards; the Toolbox Talk should include discussion of the task at hand with those involved.

    • If you don’t understand, ASK!! Don’t start the job, however simple or complex, unless you understand what you are supposed to be doing.

Please STOP and think!! Watch your hands – you’ve only got one set!!

Members may wish to review:

IMCA Hand Safety Poster

Latest Safety Flashes:

LTI: Finger injury during emergency recovery of ROV

A worker suffered a serious finger injury when their finger was caught between a crane wire and the recovery hook on an ROV.

Read more
BSEE: recurring hand injuries from alternative cutting devices

The United States Bureau of Safety and Environmental Enforcement (BSEE) has published Safety Alert 487.

Read more
NTSB: Crane wire failure

The National Transportation Safety Board of the United States (NTSB) published "Safer Seas Digest 2023".

Read more
Hot work performed outside of Permit to Work (PTW) boundary limit

A near miss occurred when a third-party contractor working removed a trip hazard from the vessel main deck, using a cutting torch and grinding disc.

Read more
Vital safety information (height of vehicle) found incorrect

“Height of vehicle” information displayed on a truck, was found to be incorrect.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.