Important safety notice to users of certain Crosby shackle products

  • Safety Flash
  • Published on 6 December 2019
  • Generated on 19 February 2026
  • IMCA SF 29/19
  • 2 minute read

Crosby has prepared an Important Safety Notice for some specific Crosby 7/8″ 6.5t shackles. 

Crosby has reached out to its customers with a communication and has asked that the following information  be included on the IMCA Safety Flash webpage.

Crosby has prepared an Important Safety Notice for some specific Crosby 7/8″ 6.5t shackles.

November 18, 2019

Dear Valued User of Crosby Products:

THE CROSBY GROUP has determined the above listed shackles may have a condition that can reduce the ultimate load capacity from the published catalog values.  The shackle bow may have a previously undetected defect, and continued use may result in loss of load, property damage, severe injury, or death.

By use of the Production Identification Code (PIC) symbols appearing on the product, we have determined the 7/8″ 6.5t shackles with PIC 5VJ shown on the bow may have this condition.  See image showing the position of the PIC on the bow. No other sizes or PICs are part of this Important Safety Notice.

The shackle bow may have a previously undetected defect, and continued use may result in loss of load, property damage, severe injury, or death.

We are requesting you identify all such 7/8″ 6.5t shackles with PIC 5VJ, remove from service, and arrange for return and replacement.  To return these products, please contact your Crosby Distributor.  For more information concerning this Important Safety Notice, contact Technical Support at 1-800-772-1500.

Please inform your customer(s) of this Important Safety Notice, or if you know of other users of the 7/8″ 6.5t shackles, please pass this notice on to that user, company, or firm.

We regret the inconvenience this may cause you and your organization, and thank you for your cooperation.  We are committed to providing you with the absolute best in Crosby quality.

Sincerely,

THE CROSBY GROUP

Latest Safety Flashes:

Fall from height during mooring due to rope tension reaction

Rope became entangled with the propellor during mooring operations of a tanker causing the operator to lose balance and fall onto the lower platform.

Read more
Missing protection – progressive wear on hydraulic hoses causes damage

During an inspection, several hydraulic hoses and fuel hoses were found in direct contact with surrounding surfaces and sharp edges.

Read more
Small engine room fire – flammable object ignited

While ramping up the starboard main engine, a small flammable foreign object ignited.

Read more
Positive: damage to Fast Rescue Craft davit wire rope caught before failure

During routine checks, it was observed that the FRC davit wire rope had a visible fracture at the socket termination area.

Read more
BSEE: Miscommunication and trapped pressure causes injury during valve maintenance

BSEE has published Safety Alert 509 relating to a gas release incident on an offshore platform.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.