Protection of water intake points for diver safety
- Recommended Practice
- Revision 0.1 - May 2023
This document provides guidance on the protection of water intake points to ensure diver safety.
Contents
Introduction
Discussion
Design of protective structure or guard
Configuration
Mesh or aperture size
Design calculations for construction of protective structures
Assessment of existing protective structure
Marine growth
Maintenance
Identification
Recommendations
Revision
-
Rev. 0.1 - April 2024Page 2 and bookmarking (layout) updated; no change to content
-
Rev. - May 2023Conversion from AODC 055 to IMCA D076
-
Rev. - February 1991Initial publication as AODC 055