Skip to content

Separate problem with two thrusters caused loss of DP

Comments:

The bow thruster gave an alarm that pitch was at maximum showing 114% on DP display. Investigation concluded that the full starboard maximum limit command/set point of the bow thruster proportional valve had been adjusted to 70%. During maximum pitch request the valve had to be permanently opened with constant and continuous hydraulic oil flow through the proportional valve. It was concluded that because the valve direction flow was set at 70% this resulted in the valve’s malfunction and pitch stuck at maximum. It was later discovered that the azimuth thruster tripped because of sea water contamination of the gear box oil.

Considerations from the above event:

  • Consideration should always be given to making heading changes in incremental steps, a heading change of 20° in one step during critical operations is not recommended.
  • To stop adverse thrust from a rogue thruster it must be shut down and not just deselected from DP control.

DP Event

Published: 13 September 2016
Download: IMCA DPE 03/16

Classification:
Submit a Report

The following case studies and observations have been compiled from information received by IMCA. All vessel, client, and operational data has been removed from the narrative to ensure anonymity.

Case studies are not intended as guidance on the safe conduct of operations, but rather to assist vessel managers, DP operators and DP technical crew in appropriately determining how to safely conduct their own operations. Any queries should be directed to IMCA at [email protected]. Members and non-members alike are welcome to contact IMCA if they have experienced DP events which can be shared anonymously with the DP industry.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.