Skip to content

UPS failure causes partial blackout – DP undesired event

Comments:

One of the fans in UPS No 1 failed causing the UPS to overheat and shut down.

The fan has been replaced and the temperature alarm tested.

Considerations from the above event:

  • The failure of UPS No 1 and subsequent failure of the other equipment should have resulted in a DP yellow alert.
  • With redundancy compromised the vessel needed to consider a move further away from the installation and out of the 500m zone.
  • Fans, filters and alarms should be adequately covered at component and sub system level by the vessel planned maintenance system.

The following case studies and observations have been compiled from information received by IMCA. All vessel, client, and operational data has been removed from the narrative to ensure anonymity.

Case studies are not intended as guidance on the safe conduct of operations, but rather to assist vessel managers, DP operators and DP technical crew in appropriately determining how to safely conduct their own operations. Any queries should be directed to IMCA at [email protected]. Members and non-members alike are welcome to contact IMCA if they have experienced DP events which can be shared anonymously with the DP industry.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.