LTI: person slipped climbing out of tank

  • Safety Flash
  • Published on 27 March 2024
  • Generated on 24 March 2025
  • IMCA SF 07/24
  • 2 minute read

A crew person was injured getting out of a fresh water tank on a vessel.

What happened?

The injured person was in the process of exiting the tank for a rest break. He was on the same level as the entry/exit hatch for the tank. As he was heading to the tank exit hatch, he slipped and during the fall he reached out with his right hand to help cushion his fall. He has been carrying a torch in one hand, nothing in the other.  

He was attended to in the ships hospital for treatment and then it was necessary for him to be taken ashore for further medical treatment. He was unable to return to the vessel due to the nature of the injury – a closed fracture of the right forearm.

Person slipped climbing out of tank

Showing entrance to the tank and inside the tank

What went right?

The two crew persons involved in the operation followed all appropriate safety controls for entry into the confined space of the tank – Permit to Work, toolbox talk, rescue plan etc. They were trained and competent in confined space entry and were wearing full and correct PPE for the task.

What went wrong?

Our member’s investigation noted that the root cause was a slippery surface in the tank due to water pooling from the cleaning operation. The inner surface of the tank was a painted smooth surface, i.e. becoming slippery when wet.

  • This kind of tank entry was considered routine work with an elevated risk to it due to the design and confines of the tanks.
    • The risk was high due to the use of water to clean the tanks which in turn creates a slippery surface where there is potential for slipping over and consequent potential injury.

Lessons learned

  • Review schedule for Fresh Water Tank inspections to see if they are being completed too frequently and exposing crew to risk.
  • Review the coating requirements for tank to see if it is feasible to apply non-slip coating to the tanks to prevent slips.

Latest Safety Flashes:

LTI: rope under tension moved and hit person’s hand

A member of the crew suffered a serious hand injury when struck by a rope under tension.

Read more
Injuries during lifting operations

A member reports two separate lifting activities involving failure of lifting equipment and resulting in minor injuries to nearby personnel.

Read more
Finger injury during manual handling

An IMCA’s members’ utilities supplier in the United States reports a serious finger injury during manual handling

Read more
Acetylene gas explosion

There was a small explosion and fire when crew were working on an oxy-acetylene system.

Read more
Crane cab fire caused by fridge

On a vessel alongside, there was a fire in the cab of a crane.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.