Diver attachment to structures by means of a weak link
- Recommended Practice
- Revision 1.1 - July 2021
The document provides guidance on the use of weak link devices for diver attachment to underwater structures to ensure safety during operations.
Contents
Introduction
Aims
Application
Design requirements of a weak link device
Devices tested
Conclusions
Other methods of safe diver attachment
Appendix 1 – Touch and close fastening weak link device
Revision
-
Rev. 1.1 - December 2023Page 2, headers, footers & document map updated; no change to content
-
Rev. 1 - July 2021Minor updates after periodic review
-
Rev. 0.1 - October 2016Conversion to IMCA D058 from AODC 058 during IMCA review
-
Rev. - September 1992Initial publication