Skip to content

Dropped object near-miss: Antenna parts worked loose and fell to deck

A member has reported a near miss incident in which part of a single side band (SSB) antenna fell off the mast to deck during bad weather. The antenna had three parts which were threaded and screwed together. The first part of the antenna was not fully screwed into the second part. In high winds, the antenna was waving back and forth in the wind which caused it to loosen and become detached. There were no injuries.

Our member notes that this incident could have had a much more serious outcome had one of the base plates dropped from a height.

SSB antenna above bridge
SSB antenna above bridge
Detached antenna shown on deck afterwards
Detached antenna shown on deck afterwards
Detached antenna shown on deck afterwards
Detached antenna shown on deck afterwards

Our member took the following actions:

  • Damaged antenna was removed from above bridge and replaced with new one;
  • Ensured correct practices were used for securing all navigation/communication equipment at height and/or on masts;
  • Thorough check of all existing equipment above bridge or at height and/or on masts, most especially after installation or maintenance by a third party;
  • Crew ‘time out for safety’ carried out emphasizing hazards and risks of working at height and/or on masts, particularly the area above the vessel bridge (sometimes called the monkey island).

The following lessons were learnt:

  • Continual vigilance is called for where there is even the potential for loose objects to fall from height;
  • Visual inspections should be thorough and careful;
  • Equipment at height that is exposed to the elements (for example on masts and on the monkey island above the bridge) should be regularly checked to ensure there is nothing working loose or any loose objects which may fall in bad weather conditions.

Members may wish to refer to the following similar incidents (search words: mast, dropped):

Members should refer to the following IMCA safety promotional material intended for use by vessel crews:

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions ( apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.