Skip to content

Gimballed frying pan – handle assembly failure

The Marine Safety Forum published Safety Flash 11-21 regarding the failure of the handle assembly on a gimballed galley frying pan. The incident had a very high potential of injury as the cook may well have been scalded or burnt. As the incident occurred during cleaning, it was fortunate that no injury occurred.

Members are encouraged to check the integrity of fittings on gimballed frying pans.

Further information can be found in the linked IMCA Safety Flash only.

Safety Event

Published: 16 September 2011
Download: IMCA SF 10/11

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions ( apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.