A storage box weighing approximately 770kg fell 4m from the forks of a forklift truck. The incident occurred when storage boxes containing items of equipment located on an intermediate floor at a supply base were being lifted from the level using a forklift truck. This near miss was categorised as a high potential event.
What went wrong?
Investigation has identified the storage box was not lifted correctly; it was not lifted from the captive pockets. If the captive pockets had been used, the bottom edge of the box should make contact with the fork itself, preventing tipping forward from the forks. The ‘captive pockets’ can be seen in the right-hand photograph below, and also in the extreme right of the photograph above (circled).
What were the causes?
Poor communication: the above was identified and followed on all the previous box retrievals. However, this was not communicated to new personnel joining the task which led to the (dropped) box being lifted from the non-captive pockets.
What are the lessons learnt?
- Review instructions on how items are identified, weighed, stored and handled;
- The lifting location of this box type should be clearly marked and visible from ground level.
Members may wish to refer to:
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.