Whilst using a safety knife to remove the outer sheaving from a core conductor, a crew member managed to cut his finger. The safety knife slipped through the sheaving and resulted in a wound to the soft tissue of the fingerprint area of the left index finger, and a superficial laceration near the mid-point of his ring finger nail.
What went wrong?
The immediate cause identified was that the injured person had failed to recognise that he had placed himself in the line of fire. He held the cable with his left hand and drew the knife (held in his right hand) towards himself. It was at this point that the knife slipped through the sheaving and made contact with his left index finger and left ring finger.
What was the cause?
Additional underlying/root causes also identified by our member are listed below:
- The risk assessment did not detail suitable control measures to ensure that people were not in the line of fire, nor did it specify the specific tools or PPE to carry out this task;
- There had been no task risk assessment (TRA) directly before starting the job.
What actions were taken? What lessons were learned?
- ‘Engineer out’ potential line of fire injuries; in this instance, alternative tooling and technique to be utilised for the removal of outer sheaving from a core conductor;
- Continue embedding the International Association of Oil & Gas Producers (IOGP) Life Saving Rules within the company processes and culture;
- Risk assessment should be suitable and sufficient for the task to be performed, specifying the correct tool(s) and PPE; the correct PPE should be readily available and used.
Members may wish to refer to:
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.