- Enter the IMCA Awards 2024: We\'re looking for outstanding Safety, Sustainability, and GHG projects.
- IP Code: Mandatory Code enters into force on 1 July. Make sure your company is up to speed with the changes.
- Early Bird tickets available for the IMCA Global Summit 2024. 3-4 December, Utrecht, Netherlands. Members can save £400.
- Discover how we are helping Members reduce emissions: Explore the ProjectGHG hub now.
- Now booking. Join the Lifting and Rigging community at our Technical Seminar in Amsterdam. Thursday 12 September 2024
- Now booking. Underwater Ship Husbandry Seminar. 10 October 2024, Singapore.
LTI: Loss of fingertip and nail
What happened?
While crew were moving lashing materials (chains, shackles and turnbuckles) from the garage deck into a storage space, the bosun suffered a serious finger injury. The incident occurred as part of routine housekeeping activity on a vessel at anchor. The bosun was in the storage space putting equipment into storage bins. These bins were under shelves in a limited space. Suddenly, the turnbuckle slipped on the bosun’s finger while he was placing the turnbuckle in the storage bin. The thread of the turnbuckle hit his finger. He took off his gloves, to find that his middle finger tip was missing and it was found inside his glove.
The bosun was sent to hospital for treatment; after 5 days he was sent to home where he could recover.
(re-enactment)
What were the causes? What went wrong?
None of the crew saw exactly what happened. The crew member helping the bosun just turned around to get another turnbuckle. The crew noted afterward that there was nothing different than normal – this was a routine task, no rush, just easy clearing of the lashing materials from the garage deck.
It was noted that there was limited storage for handling the turnbuckles, and the device slipped on the bosun’s finger. More job preparation – removing the bin from the shelves using a pallet truck – might have helped but this was not done as the the storage bin, which was very heavy, was left in place.
Actions taken & lessons learned?
- Moved the storage bins under the shelves to a better location;
- Devised procedure to eliminate manual handling of the turnbuckles.
Members may wish to refer to
Safety Event
Published: 24 July 2020
Download: IMCA SF 22/20
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.