Vessel damaged in contact with platform
- Safety Flash
- Published on 19 February 2024
- Generated on 5 December 2024
- IMCA SF 04/24
- 2 minute read
Jump to:
A CTV (crew transfer vessel) collided with a fixed platform when one of the engines failed.
What happened?
A CTV (crew transfer vessel) collided with a fixed platform when one of the engines failed. The CTV was approaching a platform to transfer crew onto it, when there was a failure of control of the port inner main engine, causing it to continue to drive the vessel forward. Whilst control of the engine and hence the vessel was regained before coming into contact with the platform, collision could not be avoided, and there was damage to the starboard side of the wheelhouse. No-one was injured.
What went right?
- The vessel crew completed their routine checks and tests prior to operations in the 500 meter zone.
- The Master made several immediate attempts to regain control including an emergency stop of the port inner main engine.
What went wrong
- The vessel’s port inner main engine got stuck in forward movement as she approached the platform.
What was the cause?
- Our member’s investigation discovered that there was a failure of the pitch control propulsion actuator. The response to regain control and time taken to do so, was insufficient to avoid contact.
- The actuator froze because of worn-out carbon brushes in a motor. There were no OEM or company planned maintenance system recommendations for actuator electric motor maintenance.
Actions
- Checked across fleet for similar actuator motors, then checked carbon brushes within these motors.
- Amended Planned Maintenance System on relevant vessels to include actuator electric motor maintenance program as specified by manufacturer.
- A reiteration of the importance of Loss of Power drills.
Related Safety Flashes
-
IMCA SF 19/22
26 July 2022
-
IMCA SF 15/18
20 July 2018
-
IMCA SF 23/17
21 September 2017
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.