Unsecured object fell and injured crewman

  • Safety Flash
  • Published on 9 June 2008
  • Generated on 3 July 2026
  • IMCA SF 10/08
  • 2 minute read

During ‘routine’ offshore operations, a piece of unsecured grillage stowed on deck toppled and struck a member of the deck crew on the foot. 

What happened?

The impact was severe and caused multiple fractures to the metatarsal bones of his foot and serious lacerations. The injured crew member was medivaced to a local hospital where he is currently being treated.

At the time of the incident the weather was flat calm and the vessel was in transit. The deck crew was involved in setting up a rigging arrangement on the over-boarding chute whilst technicians were carrying out fault-finding on other equipment. Four members of the deck crew were on their way to collect rigging equipment from the rigging container. To reach the container the crew had to pass between a deck tugger winch and a heavy piece of grating which had been removed from the top of the equipment being investigated by the technicians. This piece of grating was stowed upright against the plough guards on deck.

Whilst passing between the tugger and the plough guard the grating was disturbed and fell, striking the foot of the injured party. The grating was fitted with fixing lugs, one of which severely impacted the foot, penetrating the safety boot and caused the injuries.

Approximate position of crew on deck

This incident occurred during ‘routine’ deck activities when the level of hazard awareness and attention to detail was perhaps not as high as it would be when the vessel was fully operational on project construction work. This highlights the need for the same level of awareness, attention to detail and communications during ‘routine’ work as there is during project construction operations.

The following points were noted:

  • The grating was an obvious obstruction and partly blocked a frequently used access route to storage and working areas.
  • It was left completely unsecured and incorrectly stowed.
  • Three people attempted to walk round the obstruction without identifying the potential hazard – the fourth became the injured party.
  • An obvious hazard went unchecked and subsequently caused an accident.

Latest Safety Flashes:

Arm injury – need for focus on safe isolation and task control

A worker sustained an arm injury while troubleshooting a malfunctioning garbage compactor.

Read more
Floodlamp causes scaffold board to start smouldering

Workers on the accommodation deck noticed light smoke emanating from a nearby scaffold structure.

Read more
Lamp fixture fire in office cabin

A fire broke out in a ceiling lamp fitting in a cabin on a vessel.

Read more
BSEE: Prevent fires by inspecting cords, plugs and welding leads before use

The United States Bureau of Safety and Environmental Enforcement (BSEE) has published Safety Alert 515.

Read more
More positive stories

Some more stories of good things happening – what went right.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.