Near-miss: Internal bell door
- Safety Flash
- Published on 1 June 2004
- Generated on 6 November 2026
- IMCA SF 05/04
- 2 minute read
A Member company has reported a near miss which occurred recently when a fitting failed due to corrosion.
What happened?
This was part of the hydraulic system for the handling of the dive bell’s inner door. This caused the bell door to fall shut of its own accord during a dive, narrowly missing the bellman’s feet.
The company has noted that the following points raised by this undesired event:
- all of the pipes and fittings that form part of the bell door handling system should have been made of stainless steel – this particular fitting wasn’t.
- inner bottom doors should have been secured in the open position by a gravity-driven ‘automatic’ latch. It notes that a manual device, such as a safety chain and clip arrangement, is not appropriate as a primary device, as it requires a deliberate action to operate. This could potentially be forgotten, as has been the case on past occasions.
Our Member took the following action:
The company has instructed each of its dive teams to inspect the bell door arrangements on their vessel and confirm to the company’s diving manager the configuration of door arrangements. Where any non-conformities are found in relation to the advice given by the company as above, the team should indicate a programme for rectification.
The company has asked that its bulletin be transmitted to relevant personnel on local dive ships, including sub-contracted ships, other relevant offshore worksites and workshop-based technicians, all of whom should be aware of this issue.
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.