MSF: hose got tangled in an azimuth thruster
- Safety Flash
- Published on 10 September 2026
- Generated on 12 October 2026
- IMCA SF 16/26
- 2 minute read
The Marine Safety Forum reports Safety Alert 26-06 in which a fire hose got tangled in an azimuth thruster.
What happened?
On a vessel transiting to port during rough weather a fire cabinet on the main deck opened, resulting in the fire hose being washed overboard. The fire hose subsequently became entangled in the vessel’s starboard azimuth propeller. The fire cabinet door was fitted with industry-standard latches. The latches were not found to be broken or damaged. Following a remote inspection of the propeller, the vessel crew were able to release the fire hose by repeatedly adjusting the position of the starboard azimuth unit from forward to aft.
What went wrong?
- The rough weather caused the fire cabinet door to open. It is possible that the fire cabinet door was not fully secured before the vessel encountered rough weather; however, this has not been confirmed.
- There was no secondary securing mechanism fitted to the fire cabinet door latches.
- There was no internal securing arrangement inside the fire cabinet to prevent the fire hose from being washed out if the cabinet door opened.
- A vessel walk-around to verify sea securing was not completed before the vessel encountered rough weather.
Actions taken
- Investigation into a suitable strap that can be installed inside the fire cabinet which can act as a securing mechanism for the fire hose to keep the hose inside the box should the hatch open. The securing mechanism must not impede the crew’s ability to access the fire hose in an emergency.
- Install a secondary securing pin on the fire cabinet door to prevent the main latch from opening accidentally.
- Assess which forecasted weather and sea conditions should trigger completion of the adverse weather checklist.
Related Safety Flashes
-
IMCA SF 17/21
16 June 2021
-
-
IMCA SF 13/24
2 July 2024
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.