Technical Service Bulletin from Broco/Rankin – BR22 Plus Exothermic Cutting Torch
- Safety Flash
- Published on 22 March 2018
- Generated on 14 December 2024
- IMCA SF 07/18
- 1 minute read
The Association of Diving Contractors International (ADCI) has circulated an updated Technical Service Bulletin from Broco/Rankin relating to the BR22 Plus Exothermic Cutting Torch. This was sent out by Broco/Rankin on13 March 2018.
The bulletin, available here, notes that “a recent report of an external oxygen leak from the control valve of a BR22 PLUS prompted an investigation to determine root cause. The result of that investigation concluded that machining debris in the O-ring groove of the Control Valve Nut has interfered with the Oxygen seal in the valve assembly“.
Members using this equipment should download and read the bulletin, and take the actions recommended therein.
Leak Test Procedure
This picture shows what a BR22 PLUS torch looks like and the location of the valve stem leak. If this is not what your torch looks like, do not continue!
Outfit the BR22 PLUS torch as shown with an 18″ cutting rod inserted and the collet tightened
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.