Securing of office equipment on vessels

  • Safety Flash
  • Published on 1 October 2002
  • Generated on 18 February 2026
  • IMCA SF 10/02
  • 1 minute read

A Member has reported the following incident which occurred onboard one of its vessels.

What happened?

The vessel was in heavy seas when it was hit by several 20-25′ swells, causing the vessel to heel over to 35′. This resulted in serious disruption throughout the accommodation areas, with the Office being among the worst effected. While an employee tried to prevent a computer from falling off of a desk, he was hit by filing cabinets and a photocopier which had broken loose from the opposite side of the Office. He turned to protect himself, but was struck on the chin by one of the cabinets, resulting in a minor laceration and also in jarring to the chin.

Recommendations

The company involved has issued a reminder of the importance of ensuring all fittings, items and equipment in accommodation areas and on deck are sufficiently secured to prevent movement in heavy weather, thereby minimising the risk of injury to personnel and/or damage to equipment.

Latest Safety Flashes:

Fall from height during mooring due to rope tension reaction

Rope became entangled with the propellor during mooring operations of a tanker causing the operator to lose balance and fall onto the lower platform.

Read more
Missing protection – progressive wear on hydraulic hoses causes damage

During an inspection, several hydraulic hoses and fuel hoses were found in direct contact with surrounding surfaces and sharp edges.

Read more
Small engine room fire – flammable object ignited

While ramping up the starboard main engine, a small flammable foreign object ignited.

Read more
Positive: damage to Fast Rescue Craft davit wire rope caught before failure

During routine checks, it was observed that the FRC davit wire rope had a visible fracture at the socket termination area.

Read more
BSEE: Miscommunication and trapped pressure causes injury during valve maintenance

BSEE has published Safety Alert 509 relating to a gas release incident on an offshore platform.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.