Finger injury caused during maintenance of rotating machinery

  • Safety Flash
  • Published on 18 November 2026
  • Generated on 18 November 2026
  • IMCA SF 20/26
  • 2 minute read

Although the electrical supply was isolated, a V-belt continued to rotate due to residual mechanical energy.

What happened?

A crew member was repairing a broken grease nipple on an Air Handling Unit. Although the electrical supply was isolated, the V-belt continued to rotate due to residual mechanical energy. While manually attempting to restrain the belt, two fingers were drawn into the pinch point between the V-belt and pulley, causing a laceration and hairline fracture to the fingertip. The case was considered a Restricted Work Case (RWC) based on the medical practitioner's report, with a High Potential (HIPO) — a more severe outcome could have resulted in loss of a finger or fingers.

What can we learn?

  • Electrical isolation alone does not guarantee a zero-energy state; residual mechanical energy should be verified and controlled by an authorized and competent person, before work begins.
  • “Lone working” during tasks involving energised machinery / equipment should be discouraged and avoided where possible.
  • Never manually stop or restrain rotating machinery — allow it to come to a complete stop or secure it by an approved method.
  • Don’t rely on generic risk assessments – what are the job-specific details here? What are the job-specific and task specific controls that might have prevented this injury?
  • Ensure appropriate glove selection is considered during the risk assessment (i.e., impact protection).

Latest Safety Flashes:

LTI: serious finger injuries during crane operations

The boom of a 12 tonne crane moved towards the pipelay tower, and trapped the spotter’s left hand against a handrail. 

Read more
Finger injury caused during maintenance of rotating machinery

Although the electrical supply was isolated, a V-belt continued to rotate due to residual mechanical energy.

Read more
MSF: Serious hand injury (LTI) – failure to Isolate

Chief Engineer attempted to adjust an air filter housing clamp, and his hand entered the exposed hazard zone, contacting the rotating turbocharger fan.

Read more
MSF: Someone’s finger trapped in the door

The Marine Safety Forum (MSF) has published Safety Alert 26-15 relating to a finger caught in a door.

Read more
Hand injuries - keep your hands clear, every task, every time

One of our Members notes a spate of recent hand injuries occurring during multiple activities.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.