Hand injuries - keep your hands clear, every task, every time

  • Safety Flash
  • Published on 18 November 2026
  • Generated on 18 November 2026
  • IMCA SF 20/26
  • 3 minute read

One of our Members notes a spate of recent hand injuries occurring during multiple activities.

What happened?

One of our Members notes a spate of recent hand injuries occurring during activities such as lifting and rigging, manual handling, valve operation, drilling, grinding, machinery maintenance, handling chains, disassembly of equipment, and routine workshop activities.
In several cases:

  • Loads, chains, pins, tools or equipment shifted unexpectedly.
  • Personnel instinctively attempted to stop, guide or control moving objects by hand.
  • Rotating or powered tools contacted the hand during use or handling.
  • Pinch points were not fully recognized during otherwise routine tasks.


Hand injuries can result in cuts, lacerations and puncture wounds, crushed fingertips and fractures and nerve, tendon and nail damage. Watch your hands – you’ve only got one set!

What we can learn to prevent hand injuries

  • Plan the work: Identify pinch points, stored energy, sharp edges, rotating equipment, suspended loads and potential movement during the Toolbox Talk and final risk assessment.
  • Keep hands out of the line of fire: Before starting any task, identify where hands will be if equipment moves, a load shifts, a tool slips, pressure is released or material falls. If equipment, tools or materials move unexpectedly, your hands should remain outside the danger zone.
  • Expect unexpected movement: Loads, shackles, chains, tools, rotating machinery and pressurized equipment can move suddenly and without warning.
  • Do not rely on your reflexes: When an object starts to fall, roll or shift, do not instinctively try to catch, stop or guide it with your hands.
  • Use the right tools and equipment: Select tools suitable for the task. Use holding devices, mechanical aids and positioning tools where possible to keep hands away from hazards;
  • Control movement: Secure loads, chains, pins, workpieces and equipment before work starts. Anticipate gravity, pressure, vessel motion and stored energy.
  • Gloves are not a primary control: Gloves help reduce injury severity but will not protect against all pinch point, crushing, cutting or entanglement hazards. Correct hand positioning remains the most effective safeguard.
  • Stop and re-assess: If conditions change, equipment behaves unexpectedly or exposure increases, stop the job and assess the risk again.

Useful questions

  • Where are the pinch points in this task?
  • What could move unexpectedly?
  • Where will my hands be if the load shifts, a tool slips or energy is released?
  • Am I relying on gloves rather than safe hand positioning?
  • Can a mechanical aid, clamp or positioning tool be used instead of my hands?
  • What would happen if I instinctively tried to stop a moving object?
  • Have I considered stored energy, gravity, pressure and vessel motion?
  • How often will I stop and reassess conditions for changes?

Members may wish to refer to

Latest Safety Flashes:

LTI: serious finger injuries during crane operations

The boom of a 12 tonne crane moved towards the pipelay tower, and trapped the spotter’s left hand against a handrail. 

Read more
Finger injury caused during maintenance of rotating machinery

Although the electrical supply was isolated, a V-belt continued to rotate due to residual mechanical energy.

Read more
MSF: Serious hand injury (LTI) – failure to Isolate

Chief Engineer attempted to adjust an air filter housing clamp, and his hand entered the exposed hazard zone, contacting the rotating turbocharger fan.

Read more
MSF: Someone’s finger trapped in the door

The Marine Safety Forum (MSF) has published Safety Alert 26-15 relating to a finger caught in a door.

Read more
Hand injuries - keep your hands clear, every task, every time

One of our Members notes a spate of recent hand injuries occurring during multiple activities.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.