Uncertified bosun’s chairs

  • Safety Flash
  • Published on 16 October 2023
  • Generated on 21 November 2026
  • IMCA SF 24/23
  • 2 minute read

A Member conducting management visits to vessels discovered three separate cases where “bosun’s chairs” or similar support structures for working at height activities related to painting and repair works, had been fabricated by crew from wooden boards and ropes. 

What happened?

Our Member notes that using uncertified fall arrest equipment, including a “bosun’s chair”, can pose significant hazards and risks to the user.

Fall protection equipment, such as harnesses, lanyards, and anchors, should always be sourced from a reputable manufacturer, appropriately certified, and in accordance with local regulatory requirements. 

A member conducting management visits to vessels discovered three separate cases  where “Bosun’s Chairs” or similar support structures or working at height activities related  to painting and repair works, had been fabricated by crew from wooden boards and ropes.

What went wrong?

  • Lack of hazard recognition and appreciation: Uncertified fall arrest equipment used on some vessels, despite clear SMS requirements to the contrary.

  • Lack of awareness of existing company standards and procedures.

  • Inadequate audit & inspection process: should have picked up on this earlier – the use of uncertified “bosun’s  chairs” was not identified nor challenged by shore personnel.

  • The lessons were not learned: this has been identified before as an issue on some vessels but still not put right.

Actions

  • The unsafe “home-made” equipment was removed and destroyed.

  • Arrangements were put in place for only suitably designed and certified fall arrest and man-riding equipment to be used for Working at Height activities.

Latest Safety Flashes:

LTI: serious finger injuries during crane operations

The boom of a 12 tonne crane moved towards the pipelay tower, and trapped the spotter’s left hand against a handrail. 

Read more
Finger injury caused during maintenance of rotating machinery

Although the electrical supply was isolated, a V-belt continued to rotate due to residual mechanical energy.

Read more
MSF: Serious hand injury (LTI) – failure to Isolate

Chief Engineer attempted to adjust an air filter housing clamp, and his hand entered the exposed hazard zone, contacting the rotating turbocharger fan.

Read more
MSF: Someone’s finger trapped in the door

The Marine Safety Forum (MSF) has published Safety Alert 26-15 relating to a finger caught in a door.

Read more
Hand injuries - keep your hands clear, every task, every time

One of our Members notes a spate of recent hand injuries occurring during multiple activities.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.