Vessel hit and destroyed fender
- Safety Flash
- Published on 17 December 2019
- Generated on 13 June 2026
- IMCA SF 30/19
- 2 minute read
A vessel collided with the quay, destroying the fenders.
What happened?
The vessel picked up the pilot and proceeded towards the harbour. The wind was SSW 4-5 with good visibility. As the vessel passed the breakwater with a speed of 5.5 knots, the pilot advised to change over to the bridge wing control. During the change over to the bridge wing control, the vessel began to turn to starboard.
The pilot ordered that the vessel turn hard to port, engine half ahead and bow thruster full to port. After a few seconds, the Master realised that this manoeuvre would not prevent the vessel from impacting the quay, therefore he left the bow thruster full to port and give the main engine full astern to reduce the impact. The vessel hit the fenders of the quay on starboard bow. The fenders were destroyed.
What went wrong?
- The combination of wind and current coming past the breakwater forced the vessel to starboard.
- Insufficient attention was given to the movement and motion of the vessel.
- The crew were distracted by the change to bridge wing control.
What actions were taken?
-
Crew to make an overview of all items which influence this kind of incident and identify lessons learned.
Featured Safety Flashes
-
IMCA SF 15/19
1 July 2019
-
-
IMCA SF 10/18
9 May 2018
-
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.