MSF: Bulk hose entanglement with Azi-pod propulsion unit

  • Safety Flash
  • Published on 12 September 2013
  • Generated on 18 August 2025
  • IMCA SF 14/13
  • 1 minute read

The Marine Safety Forum has published safety flash 13-26 regarding an incident in which a hose became entangled with an Azi-pod propulsion unit. 

The incident occurred during preparations to deliver water to a platform. It was decided to use the aft manifold connection on the starboard quarter for the water transfer, and two ABs were standing by ready to connect the hose.

After being lowered by the crane, the hose was observed to sink in the water close to the stern cut-away, under which the Azi-pod units are mounted.

Details of the incident are now available on request from the Marine Safety Forum.

Latest Safety Flashes:

Brazil: diver permanently disabled after decompression illness

Conviction of diving company upheld as work accident suffered by a diver who lost strength in his upper limbs and the ability to move, requiring permanent use of a wheelchair.

Read more
Diver reports unwell post-dive: non-decompression illness

A diver experienced a dizzy spell about one hour after completing a diving operation

Read more
Shore-side crane boom collides with vessel mast

During shipyard lifting operations, the boom of a dock crane made contact with the vessel mast.

Read more
Injury sustained while operating steel lifting magnet

While preparing to transfer steel plates using a steel lifting magnet, a crew person was injured.

Read more
Head Injury in Engine Room

A Chief Engineer sustained a head laceration injury.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.