Skip to content

‘Routine’ task, non-routine result: Finger injury during welding

A member has reported an incident in which a welder injured his finger whilst at work. The welder was finishing cutting and noticed there was some loose slag built up from previous work. He swept this slag away with his hand and felt he had cut his left index finger. He inspected the welder’s hot work gloves he was wearing and noticed there was a hole in the left index finger of the glove. He was unsure if the hole was caused by sweeping away the slag or if it was already present.

Injury to hand
Injury to hand

This was a ‘routine’ or everyday activity, where complacency had perhaps set in.

Our member notes:

  • It is important to retain a focus on the ‘routine’ as well as on significant, major or potentially catastrophic ‘high risk’ events;
  • Crew should remain alert to memory lapse or lack of awareness.

In this case:

  • The welder should have used a broom for removing the loose slag;
  • Gloves are personal protective equipment (PPE) and worn for protection, they are not sweeping tools;
  • PPE should be regularly checked for damage. Perhaps most especially, helmets, safety glasses and gloves – Change out and dispose of damaged PPE;
  • The incident was discussed at welder’s pre-start meetings and use of brooms was reiterated. The risk assessment for welding was reassessed regarding proper use of tools, equipment and materials.

Members may wish to refer to the following similar incidents (key words: gloves, cut):

Members should be aware that IMCA has a pocket safety card on this topic – Watch your hands.

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions ( apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.