MSF: “Pinch point” finger injury during hose handling

  • Safety Flash
  • Published on 2 April 2015
  • Generated on 18 September 2025
  • IMCA SF 05/15
  • 1 minute read

The Marine Safety Forum has published the following safety flash regarding an incident in which someone injured his finger during hose handling.

The incident occurred when a vessel was performing operations at the leeside of the platform. The fuel hose was lowered by a bridle which was connected to the saddle fitted on the hose. The hose coupling was hanging loose. An Able Bodied Seaman (AB) handled the hose coupling and moved it away.

The other AB positioned the saddle on the ship’s side, between two yellow pins, and started to secure the saddle to one of the pins using a rope. When the vessel moved due to the wind and swell, the saddle moved on the railing between the pins and the AB’s finger was pinched between the saddle and the pin.

Latest Safety Flashes:

SWL plate dropped from crane block

An “SWL” plate weighing 0.9kg fell from the auxiliary hook block and landed on the main deck of a newly purchased vessel.

Read more
Unsafe Lifting practices during dry dock

An unsafe attempt was made to lift 14 empty oil drums using only a web sling, without clamps, certified frames, or proper securing.

Read more
Handling alarms on the bridge – a DP incident

DPO accidentally pressed the adjacent "Take" button on the DP panel.

Read more
Uncoordinated Emergency Shutdown due to pipe failure

All cargo pumps (No. 1, 2, and 3) tripped simultaneously due to Emergency Shutdown (ESD) activation.

Read more
UK HSE: oil company fined after serious failure of elevator

The UK HSE has fined a North Sea oil and gas operator £300,000 after three crew members descended into a water filled lift shaft on a floating platform in the North Sea causing them to become partially submerged.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.