Recall of Pains Wessex white collision warning hand flares

  • Safety Flash
  • Published on 20 June 2006
  • Generated on 8 October 2026
  • IMCA SF 06/06
  • 2 minute read

Pains Wessex has announced a recall of its white collision warning (MK7) hand flares, item number 52651.

What happened?

The recall follows a recent incident in which an individual was seriously injured while using this flare. Pains Wessex has identified that there may be a risk that some of these white flares will not fire as intended. All white flares are therefore being recalled as a safety precaution.

No red (MK7) hand flares nor any other Pains Wessex products are being recalled. The recall does not affect Pains Wessex Australia Aurora hand flares.

The Pains Wessex white collision warning (MK 7) hand flare, item number 52651 is sold on its own and is also contained as a part of the company’s collision warn-off kit and the ORC RORC distress kit as illustrated below.

Pains Wessex white collision warning (MK 7) hand flare

Customers with in-date Pains Wessex white collision warning (MK7) hand flares are advised not to use the flare and are asked to return it immediately to the place of purchase where the purchase price will be refunded. If unable to return the flare to the place of purchase, customers may take the flare to their nearest chandler.

Customers with out-of-date Pains Wessex white collision warning (MK7) hand flares should contact Pains Wessex on +44 (0) 23 9262 3965.

To assist its customers with this recall, Pains Wessex has set up a help line during office hours on +44 (0) 23 9262 3962, or the company can be contacted via email at [email protected]

Latest Safety Flashes:

Hydraulic oil leak detected below moonpool

A hydraulic oil leak was identified below the moonpool after the worktable doors were opened.

Read more
Dropped scaffold board (kickplate) – SIF near miss

A scaffolding kickboard was accidentally dropped falling from a height of 6.5 metres to the main deck.

Read more
H₂S detected on deck

During vessel transit back to port, Hydrogen Sulphide (H₂S) was detected in the open space on the main deck.

Read more
Restoration and verification after maintenance

A missing flooring panel was identified beneath a 415V bow thruster electrical motor cabinet.

Read more
Vessel contact during materiel transfer in adverse weather

One vessel lost heading and position control because of the strong winds and swell, pushing it toward another.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.