Lost time injury (LTI) caused by inadvertent activation of expired line throwing device

  • Safety Flash
  • Published on 11 December 2012
  • Generated on 22 February 2026
  • IMCA SF 13/12
  • 2 minute read

A Member has reported an incident in which a crewman was seriously injured when inadvertently struck by a line throwing rocket.

What happened?

The incident occurred when a search was made for a small diameter rope for use as a plumb line. Since no suitable rope was easily available, a member of the crew decided, without consulting anybody else, that the small diameter line from an old rocket assisted line throwing apparatus (LTA) could be used. Whilst trying to retrieve the line from the device, it slipped from the crew member’s hands, dropped to the deck and unfortunately went off. A crew member was working nearby and was inadvertently struck, causing a deep cut on his left leg near the shin.

Line throwing apparatus

Line throwing apparatus

Injured person’s shin

Injured person’s shin

This photo may show graphic content.

Our member’s investigation noted the following:

  • The LTA was uncontrolled and was not on any inventory list.
  • The LTA had no safety pin or markings indicating date of manufacture, operating instructions or expiry date.
  • There was inadequate control of spares and stock leading to a shortage of rope for the task in hand.
  • The crew member took no account of the possible risk to himself and others in handling an explosive device.

The company made a number of recommendations particularly concerning pyrotechnic devices such as flares and rockets:

  • Pyrotechnics should be controlled items, stored in a safe place, and only used by appropriately trained personnel.
  • Pyrotechnics should be used only for the purpose for which they were intended or manufactured.
  • Expired or ‘out of date’ pyrotechnics should be disposed of according to local regulatory requirements, and vessel crew should be fully familiar with company procedures and requirements for disposal.

The company made a number of further recommendations:

  • Better control of work and toolbox talks might have prevented this incident.
  • Vessel crew should be aware of vessel garbage management plan.
  • Control of spares should be such that appropriate quantities of parts and stock are available for everyday operations.

Latest Safety Flashes:

Fall from height during mooring due to rope tension reaction

Rope became entangled with the propellor during mooring operations of a tanker causing the operator to lose balance and fall onto the lower platform.

Read more
Missing protection – progressive wear on hydraulic hoses causes damage

During an inspection, several hydraulic hoses and fuel hoses were found in direct contact with surrounding surfaces and sharp edges.

Read more
Small engine room fire – flammable object ignited

While ramping up the starboard main engine, a small flammable foreign object ignited.

Read more
Positive: damage to Fast Rescue Craft davit wire rope caught before failure

During routine checks, it was observed that the FRC davit wire rope had a visible fracture at the socket termination area.

Read more
BSEE: Miscommunication and trapped pressure causes injury during valve maintenance

BSEE has published Safety Alert 509 relating to a gas release incident on an offshore platform.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.