USCG: fatalities in engine room fire caused by fuel spray ignition

  • Safety Flash
  • Published on 2 June 2015
  • Generated on 5 May 2026
  • IMCA SF 08/15
  • 2 minute read

The United States Coast Guard (USCG) has published Safety Alert 4-15 entitled ‘Engine Room Operations: Maintaining Machinery, Knowing Escape Routes, & Conducting Thorough Engineering Watches’.

The safety alert deals with an engine room fire that occurred onboard an older cruise ship while it was at berth. A fuel oil spray under pressure developed from an operating engine’s fuel supply line when a bolted flange parted. The fuel spray ignited when it contacted the engine’s exhaust piping or turbocharger components. The vessel’s fine mist extinguishing system automatically activated and performed as designed extinguishing the primary fire. Fuel pumps and shutoff valves were also secured.

However, the short-duration fire also ignited cable bundles, quickly filling the machinery space with smoke. As a result, one crew member and two technicians were unable to egress and perished in the engine room.

The US Coast Guard has issued this safety alert in order to:

  • Reiterate the importance of vessel engineers recognizing and taking action on engine manufacturer technical bulletins and service letters.
  • Remind personnel working in machinery spaces to have a personal exit plan no matter where they were working.
  • Stress the value of having engineers frequently perform detailed engineering space inspection rounds on engines, systems, and other equipment.

Latest Safety Flashes:

Failure of moonpool railing system caused man overboard situation in moonpool

A crew member was working in the moonpool area when they lost balance and fell in but managed to grab hold of the guidewire, preventing an uncontrolled fall into the sea.

Read more
Diver entanglement – uncontrolled equipment in the water column

A diver hung a rubber mat with welding rods connected with a rope and carabiner to the rope suspending the welding cables resulting in a compromised work area.

Read more
Diver entanglement – umbilical caught around an anode

A diver’s umbilical got caught around an anode attached to a conductor shaft at 18 msw.

Read more
Unsecured sheave pin fell from crane

A sheave pin weighing 1.3 kg was found on deck.

Read more
Heaving line snap-back causes injury
Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.