Fatality: Person crushed when secured material fell on him

  • Safety Flash
  • Published on 17 March 2021
  • Generated on 21 November 2026
  • IMCA SF 08/21
  • 2 minute read

Stored metal plates fell on a crewman causing fatal injuries. This incident has been shared with one of our members by a client company, and is public domain news. The incident does not involve an IMCA member. 

What happened?

Third-party sub-contractors on a vessel were inspecting a sling that was wrapped around five metal plates. The plates were situated on two pieces of wood, positioned lengthwise on their edge and against a stanchion on the deck. The plates were secured to the stanchion by a ratchet strap.  One crewman was trying to access a sling that was wrapped around the plates, so he instructed his co-worker to loosen the ratchet strap.

Screenshot 2021 03 17 110829

When he gave the instruction, he was standing next to the plates. The co-worker followed the instruction and loosened the ratchet strap, which resulted in the plates falling toward the first person and pinning him against another storage rack on the riser deck. Several people ran to the scene immediately upon hearing calls for help, but the plates were too heavy for them to lift.

The incident is still under investigation.  Interim recommendations are:

  • Evaluate stored equipment and materials to minimise hazards related to stored energy and handling.

  • Discuss the importance of hazard identification in the task planning process and using Time Out for Safety to manage changes in the work environment.

IMCA notes: this was an absolutely preventable and foreseeable incident. Please take time out to inspect any similar storage arrangements at your sites and ensure adequate controls are in place to prevent the same event happening.

Latest Safety Flashes:

LTI: serious finger injuries during crane operations

The boom of a 12 tonne crane moved towards the pipelay tower, and trapped the spotter’s left hand against a handrail. 

Read more
Finger injury caused during maintenance of rotating machinery

Although the electrical supply was isolated, a V-belt continued to rotate due to residual mechanical energy.

Read more
MSF: Serious hand injury (LTI) – failure to Isolate

Chief Engineer attempted to adjust an air filter housing clamp, and his hand entered the exposed hazard zone, contacting the rotating turbocharger fan.

Read more
MSF: Someone’s finger trapped in the door

The Marine Safety Forum (MSF) has published Safety Alert 26-15 relating to a finger caught in a door.

Read more
Hand injuries - keep your hands clear, every task, every time

One of our Members notes a spate of recent hand injuries occurring during multiple activities.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.